Newest Products
E2A Swedging Pliers
Heavy Duty Swedging pliers for use on all woodwinds that need keys tightened. The holes in pliers are oval shaped and highly polished to prevent key marring and gives burnishing...
E3 Spring Replacing Plier
These E3 Spring Replacing Pliers are designed with slotted jaw to press in needle springs smoothly without bending them. Also excellent for replacing pins in flute keys. 5-1/2 long.
E30 File Cleaner Brush
This combination file card (for coarse files) and brush (for fine cut files) with a specially designed pick, is a handy file cleaning tool.
E31 Boring Bar
This boring bar has a cutter that can be reground for sharpness. Tool is used to bore exact inside diameter when making new tenon replacement plugs or new socket graft...
E32 Morse Taper Wide Angle Live Center's
Special Combination Wide Angle Woodwind Live Center This center replaces a standard tailstock center in a lathe. Revolves with the work and produces no friction. Holds all woodwind joints including...
E33 Clarinet Pad Leveling Tool (Pad Slick)
Used to level pads when regulating clarinets, oboes, etc.. Has a small notch to aid in applying cork to clarinet crows foot.
E34 Flute Pad Ironing Tool
A tempered, spring steel tool. Used for smoothing skin on flute pads. Also used to apply and spread a drop of water on pad surface for seating or applying talc...
E35 PAD TUCKER
This handy double ended tool is for use in saxophone and other leather pad seating and fine adjustment. Sturdy construction with two precise work tips and lightweight design. Overall length of...
E36 Flute Grommet and Booster Pliers
The E36 Flute Pad Grommet Ring Pliers are very useful when working on French style open hole FFlutes. 5-1/4 (133mm) long. These precision made pliers are used to remove the...
E38 Triangular Scaper
Triangular Scrapers are used for scraping and cleaning solder from inside of tubing, for trimming tight tenon joints and many other general uses, including use as a fine lathe cut-off...
E4 Spring Punching/Removal Pliers
Remove broken springs from posts on all reed instruments. Saves hours in overhauls when necessary to remove stuck and rusted springs. No longer necessary to use a punch and a...
E40 Hollowed sides, straight edges
Triangular Scrapers are used for scraping and cleaning solder from inside of tubing, for trimming tight tenon joints and many other general uses, including use as a fine lathe cutoff...
E41 Flat Spring Hole Punch
An ideal way to punch holes in flat springs. Used primarily for punching an extra hole in flat springs where there are two screws, as in bassoons and some flutes....
E42 Sax Pad Slicks
These pad slicks are NOT meant to bend keys, but to protect the pads from the tone hole edge AFTER the leveling is done and before the seating. *Only .020...
E43 SAX KEY CLAMP
Used to seat sax pads with no need to compress sax key corks. Fast and easy, like flute clamps at providing pressure on each key. Three variations including a light...
E45 Solder Clip
Soldering Clips These stainless steel solder clips will not rust and do not corrode as easily from the heat and flux. Hold braces and flanges while silver soldering. Hold nibs...
E46 Small Sliding Caliper
Small Sliding Caliper (Vernier Gauge), marked in inches and millimeters. Handy for a multitude of jobs, including measuring pads and tenon joints.
E47 Set of Three Pivot Screw Key Reamers
Set of THREE pivot screw key reamers provide a wider size range. Better cutting angle. E47 Set of Three Pivot Screw Key Reamers E47H Set of Three Pivot Screw Key Reamers...
E49-E50-E51-E52 Steel Tweezers
Tweezers Available: E49 Plain steel, soldering tweezers, inexpensive, 6 (152mm) E50 Slide lock tweezers blunt smooth tips, nickel plated 6-1/2 (165mm). Holds parts snugly. E51 Light, medium sharp point, made...