Newest Products
G39 Valve Guide Fitting Tool
This tool is scientifically shaped, drilled and tapped to hold valve guides and stars for valve instruments. When the guide is fitted, remove it from the tool and install it...
G40 Slide Solder Rod
This G40 Slide Solder Rod is properly tapered for soldering into all stuck slides on cornets, trumpets, mellophones and other small tube instruments after removing crooks. Warm the slide so...
G40A-G40E Hollow Tip Solder Plug
These plugs are properly tapered for soldering into all stuck slides on small instruments after removing crooks. Holes allow for faster heat dispersal along with EASY removal of stuck slide...
G41 Trombone Bumper Removers
The G41 Trombone Bumper Remover is available in 2 Sizes. Easiest possible method for removing stuck cork and felt bumpers from the cork barrel. Our Trombone Bumper Removers specifically designed...
G42 Adjustment Screw Drilling Jig
This newly designed tool allows you to convert the adjustment screws of any instrument and obtain the same results. No more adjustment screws chewing through to the key foot, material...
G43 Soldering Jig
Ferree's Soldering Jig is a high strength, industrial quality, heavy duty soldering jig. It features full steel construction for durability and rigidity. Parallel type, screw set jaws. Arms are 100%...
G44 Screw Slot Sawing Tool
The Screw Slot Sawing Tool accurately saws screwdriver slots in stack and hinge screws. Takes all necessary rod sizes. The steel shaft is 3/8" (9.5mm) to fit the chuck...
G45 Cork Barrel Dent Remover
A really great time saver! No longer is it necessary to remove trombone slide rails to take dents out of the cork barrel. Also, this tool can be used to...
G50 Bassoon Tenon Tool
G50-G51-G52 Bassoon Tenon Tools These tools work similarly to the G84 Clarinet Tenon Tool, except that they have tapered pilots instead of cylindrical pilots. G50 To replace the tenon on...
G51 Bassoon Tenon Tool
G50-G51-G52 Bassoon Tenon ToolsThese tools work similarly to the G84 Clarinet Tenon Tool, except that they have tapered pilots instead of cylindrical pilots.G50 To replace the tenon on bassoon tenor...
G52 Bassoon Tenon Tool
G50-G51-G52 Bassoon Tenon ToolsThese tools work similarly to the G84 Clarinet Tenon Tool, except that they have tapered pilots instead of cylindrical pilots. G50 To replace the tenon on bassoon...
G53 Clarinet Tone Hole Undercutter (6 cutters)
This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel...
G54 Bass Clarinet Tone Hole Undercutter (7 cutters)
This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that...
G55 Insertion Rod-Alto Clarinet
This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that...
G56 Clarinet Bore Measuring Tool
Clarinet manufacturers spend thousands of dollars to perfect the inside boring of a clarinet joint to make it absolutely smooth. However, when we measured the inside diameter of hundreds...
G60 Adjustable Jewelers Saw Frame
Adjustable Jewelers Saw Frame. The finish is polished. Blade length is 5" (127mm) overall length is 11-12" (292mm). Blade is NOT included, see below. Also Available: D27 Jewelers Saw blades,...
G61 Orange Flake Shellac, 1lb (454gr)
One pound bags of flake shellac. Best grade available. Can be dissolved in alcohol or melted into sticks. 1lb (454gr)
G62 Metal Back Saw
All-purpose saw cuts copper, brass, plastic and wood leaving smooth edges. 6-1/2" blade, 32tpi, .010" thick, 1-3/16" cutting depth. Blade is non-replaceable. Cuts on pull stroke.
G63 Hacksaw Frames and Blades
G63 is a good quality metal hacksaw with a adjustable frame. BladesBlades sold each or Box of 10G63A 18 teeth per inch (7 teeth per 10 mm)G63B 24 teeth per inch...
G66 Lower Tenon Plug Holder
This slotted collet type holder secures lower joint tenon plugs tightly in the lathe chuck while the reaming operation is completed. An inexpensive answer to a common problem.